North End Bi Folding Glass Doors are the perfect choice for opening up any living space to achieve aesthetically pleasing unobstructed views into the outside surroundings. Commonly used on conservatory products, bi-fold doors in North End are fast becoming the first choice for homeowners wishing to achieve the above.
Utilising fully glazed sashes, bi fold doors can provide a large proportion of their unobstructed views even when closed. Large glazed panes on bi folds help to enhance the lighting aspect of a range of rooms in your home, use them to bring light to your living room, dining room or conservatory.
Bi-fold doors are not only aesthetically pleasing but also highly versatile. With the ability to effortlessly sweep aside whole walls in a matter of seconds, bi fold doors North End can open up any room to embrace the great outdoors.
This style of door can be manufactured in either an inward or outward opening style combining various numbers of panes which neatly fold either internally or externally. The folded panes take up very little room when fully open making them the ideal choice for restaurants, cafes and bars.
Ultra Slim Bifold Doors
Although bifold doors come in different designs, the method of installation is the same. It's a good idea to read the instructions that came with the bifold doors before you begin. Generally the doors are 80 inches tall but can be cut down to fit. The height of the door opening should be two inches higher the length of the doors to allow enough clearance for the track and the rest of the hardware.
Start by marking the top of the opening with a pencil and line up the track. Mark and pre drill screw holes. (Use a drill bit that is smaller then the screw itself ).
Position the pivot brackets (inside the header track ) 3/8 inch away from the end of the opening.
Line up the pivot bracket with the header track. (You can use a plumb bob or lay a carpenters level against the side frame and make a mark at the floor and align the bottom track. I always take the measurements of where the top track will line up and transfer that measurement to the bottom where the pivot bracket will be installed).
If the floor is covered with carpet, you will need to use a wooden pad underneath the bottom pivot bracket. Cut away the carpet just enough to fit the wooden pad and fasten it down to the floor.
If it's a cement floor, use adhesive especially made for gluing to cement. Let the adhesive set for 24 hours, line up the pivot bracket with the top track and fasten it to the wooden pad.
Once all the brackets are lined up with each other and in place, you can hang the bifold doors by simply folding the doors in half and fitting the guide pin in the upper track. Next, lift up the door and fit the adjustable pivot into the pivot bracket at the bottom of the door opening.
Repeat the last steps for closets with four panels.
Install the doorknobs at a height where it is most comfortable to reach. Don't install the doorknobs too close to the edges.
If the opening requires four section bifold doors, you will need to install alignment brackets on the back side of the two middle doors. (Approximately 16 inches from the bottom of the doors). These brackets will interlock and keep the doors aligned with each other.
I hope this rough guide will help you understand how to hang bifold doors.
Bifold doors now form part of almost all new build home extensions due to their ability to open up large unobstructed openings allowing the new living space to seamlessly merge with the garden.
The enormous growth in demand for these folding sliding doors in the UK in recent years has led to a substantial increase in the number and type of different door systems now available to the consumer. They are now widely available in a choice of materials and finishes with the three most popular being thermally broken aluminium, upvc and hardwood.
Choosing the right bifold door for your project is an important decision and one that should not be taken purely based on cost alone. Your budget will naturally have an influence on your buying decision but there are other important factors that need serious consideration to ensure you are not disappointed with your purchase. Here are the top five points that are regarded by many as the most essential research when considering a bifold door purchase:
1. THERMAL PERFORMANCE
Since most bifold door installations will be subject to compliance with building regulations it is important to check that the folding door you are about to buy will meet your local authority's interpretation of current building regulations in terms of overall U-value performance. This calculation is based on the specification of the double glazing together with the profile design and dimensions to determine the insulation benefits of the door measured in U-values with the lower the value the better the insulation achieved. The minimum acceptable under current building regulations for replacement doors is a 1.8 U-value but some local authorities will insist on lower values particularly for new build extensions.
2. GLASS SIGHT LINES
Another important consideration should be the sight line or width of door profiles between each panel of the folding sliding door as this will affect the visible glass area available when the door is in the closed position. Most bifold doors are designed with dedicated profiles to minimise these sightlines as much as possible but some timber and many upvc folding doors use wide, chunky profiles that produce very broad sight lines in excess of 200mm wide that will ultimately spoil your view.
Most folding doors will feature a high security locking system but many still use face fixed or flag hinges that can pose a possible security issue and allow the hinges to be removed from the outside when the door is closed. Some upvc bifold doors may also use an exposed gearing system that is accessible from the outside of the door when the door is closed which can also pose a possible security threat. You can eliminate these potential security problems by ensuring you choose a folding door that has fully concealed gearing and hinge fixings.
Although a flush threshold is the most popular option especially for internal bifold doors this may not always be practical in some cases and a conventional raised threshold will need to be used. It is important to note that the height of these can vary considerably with some upvc bifold door thresholds exceeding 125mm. Such a high 'step-over' threshold may create an accessibility issue for children and the older generation. The latest bifold door designs offer raised thresholds designed to minimise the trip hazard with some offering thresholds as low as 50mm high.
5. TOP HUNG OR BOTTOM ROLLING
Some bifold doors are hung from the top to allow for a minimal threshold at floor level but with all the weight of the door being supported from the top a substantial upgrade of the lintel is normally required for strength and stability. Bottom rolling folding doors are a cost effective and popular alternative since the weight of the door is carried at ground level rather than suspended from the lintel.
Whether you decide on an aluminium, upvc or hardwood bifold door it is a major purchase for your project and one that should be carefully considered to ensure the very best value for your money. Buying a cheap bifold door may prove a disappointment unless you check carefully that the door you are buying will meet your needs and expectations before you order.
Bi-Folding Doors - The Benefits of Using Them
Bifold doors have much greater flexibility than sliding patio doors or French doors. They can be fully opened, completely closed, or partially opened depending on the amount of space required. Their ability to connect the inside to the outside is unsurpassed. For example they allow the whole of the back wall of a house to open out onto the garden.
Doors are available in a range of materials including PVCU, aluminum, timber and aluminum-clad timber. The latter, although expensive, allows hardwearing aluminum on the outside and an attractive wooden finish on the inside. PVCU doors are usually the cheapest option but are limited in colours (white). Aluminum doors can be powder coated so are available in almost any colour or finish. Timber doors are usually made of hardwood or laminated timber. The latter is essential if the door were in a South facing, exposed or coastal position. In that location environmental extremes would cause hardwood doors to warp and malfunction. Any reputable bi fold door manufacturer will advise you of the best choice for your situation.
When choosing bifolding patio doors it is essential that you select ones that are constructed to the latest regulations. They must be completely weather proof in even the harshest conditions. The glazing must also be optimised to give the best thermal insulation. Other considerations are the size and number of panels, how these panels can be configured, the type of door threshold and the location of trickle vents. Quality gearing is also essential if you want smooth and durable door performance.
These kinds of doors are becoming more and more widely shown in the media. They are often seen in home renovation or remodelling TV shows to provide that elusive wow factor. Their versatility in configuration and availability in various materials make Bifold doors a tempting option for anyone considering installing or upgrading a traditional patio door.
A bifold door is a door that has multiple sections, folding in pairs. The doors can be opened from either side for one pair, or fold off both sides for two pairs. Wood is the most widely used material, and doors may also be made of metal or glass. Bifolds are usually designed for closets, but may also be used as passageways between rooms. They are a great asset to any home or apartment and drastically enhance the light in the room.
There are many different kinds of bifold doors currently on the market. Arguably the most popular is the louvered door. A louvered door has stationary or movable wooden panels (often called slats or louvers) which permit open ventilation while allowing privacy and blocking the passage of light inside. Being moderately weak structures, they are generally used for laundry rooms and closets, where effective is required. Smaller louvered bifold doors are also commonly used to form window shutters in most homes and businesses.
Other popular ones are mirrored. These are most common in bedrooms and bathrooms of the home. Mirrored bifolds may act as full-bodied mirrors, and that is one of the traits that makes them common in the wardrobe. Another popular one is the raised-panel bifold. These doors are the work of fine craftsmanship and have a very elegant look. The raised panel is achieved on these doors by sawing or etching designs into the wood of the doors that give them a "raised" look. These are commonly installed in bedrooms, kitchens and pantires.