Upton Park Bi Folding Glass Doors are the perfect choice for opening up any living space to achieve aesthetically pleasing unobstructed views into the outside surroundings. Commonly used on conservatory products, bi-fold doors in Upton Park are fast becoming the first choice for homeowners wishing to achieve the above.
Utilising fully glazed sashes, bi fold doors can provide a large proportion of their unobstructed views even when closed. Large glazed panes on bi folds help to enhance the lighting aspect of a range of rooms in your home, use them to bring light to your living room, dining room or conservatory.
Bi-fold doors are not only aesthetically pleasing but also highly versatile. With the ability to effortlessly sweep aside whole walls in a matter of seconds, bi fold doors Upton Park can open up any room to embrace the great outdoors.
This style of door can be manufactured in either an inward or outward opening style combining various numbers of panes which neatly fold either internally or externally. The folded panes take up very little room when fully open making them the ideal choice for restaurants, cafes and bars.
How to Hang Bifold Doors
As with most reasonably large property expenditure, a bifold door normally a one-off purchase. The technical detail is likely to leave the average consumer confused, so what is involved in choosing a bifold door that will allow you to enjoy your home more, will be versatile, and will look and function beautifully for many, many years?
Below are some tips on what to consider, but we suggest you look for a bi folding door specialist to supply and fit your door who will perform a survey before building your door and give you any advice you need. Should you decide to use your builder or a professional fitter, they should take responsibility for the precise measurements and ancillary requirements for the door. In unskilled hands, these doors are likely to produce problems so an experienced installer should be used. However, you may well prefer to perform your own research and we hope that these tips prove useful.
Essential Considerations • Which material - aluminium, PVCu or timber products • Configuration options - how should it fold and open • Size and number of panels • Glazing - for thermal, privacy and appearance • Threshold Options - for accessibility and weatherproofing • Trickle Vents - for ventilation and to meet building standards • Gearing - for smooth operation and high performance • Cill and Drainage - are they necessary for your project
Overview - Clearly bifolding doors are not a cheap alternative to the traditional sliding door, but what are the real gains in making the extra investment. The most apparent is the fact that folding sliding doors are fully retractable. The commonly known French door is just a permutation of a bifolding door and most bifolding door manufacturers will be able to make their system into a french door. A French door is a double pane system which opens in the middle so the both leafs are fully open and set at right angles to the track. They have been very popular over the years and can allow for an elegant opening mechanism with great clear glass views. Please find the strengths and weaknesses of the bifolding door below.
Bifolding Door - Strengths
Fully retractable door panels
Choice of Aluminium and UPVC frames
Up to 10 metres wide
Add value to any home
Choice of over 400 RAL colours (Aluminium frames)
Up to 40 opening options
Well tested and regulated products
Bifolding Door - Weaknesses
More expensive than traditional alternative
UPVC frames can contract due to weather conditions
Must be installed with precision
UPVC frames are weak and are not capable of reaching widths more than 6 metres
How to Hang Bifold Doors
Although bifold doors come in different designs, the method of installation is the same. It's a good idea to read the instructions that came with the bifold doors before you begin. Generally the doors are 80 inches tall but can be cut down to fit. The height of the door opening should be two inches higher the length of the doors to allow enough clearance for the track and the rest of the hardware.
Start by marking the top of the opening with a pencil and line up the track. Mark and pre drill screw holes. (Use a drill bit that is smaller then the screw itself ).
Position the pivot brackets (inside the header track ) 3/8 inch away from the end of the opening.
Line up the pivot bracket with the header track. (You can use a plumb bob or lay a carpenters level against the side frame and make a mark at the floor and align the bottom track. I always take the measurements of where the top track will line up and transfer that measurement to the bottom where the pivot bracket will be installed).
If the floor is covered with carpet, you will need to use a wooden pad underneath the bottom pivot bracket. Cut away the carpet just enough to fit the wooden pad and fasten it down to the floor.
If it's a cement floor, use adhesive especially made for gluing to cement. Let the adhesive set for 24 hours, line up the pivot bracket with the top track and fasten it to the wooden pad.
Once all the brackets are lined up with each other and in place, you can hang the bifold doors by simply folding the doors in half and fitting the guide pin in the upper track. Next, lift up the door and fit the adjustable pivot into the pivot bracket at the bottom of the door opening.
Repeat the last steps for closets with four panels.
Install the doorknobs at a height where it is most comfortable to reach. Don't install the doorknobs too close to the edges.
If the opening requires four section bifold doors, you will need to install alignment brackets on the back side of the two middle doors. (Approximately 16 inches from the bottom of the doors). These brackets will interlock and keep the doors aligned with each other.
I hope this rough guide will help you understand how to hang bifold doors.
A bifold door is a door that has multiple sections, folding in pairs. The doors can be opened from either side for one pair, or fold off both sides for two pairs. Wood is the most widely used material, and doors may also be made of metal or glass. Bifolds are usually designed for closets, but may also be used as passageways between rooms. They are a great asset to any home or apartment and drastically enhance the light in the room.
There are many different kinds of bifold doors currently on the market. Arguably the most popular is the louvered door. A louvered door has stationary or movable wooden panels (often called slats or louvers) which permit open ventilation while allowing privacy and blocking the passage of light inside. Being moderately weak structures, they are generally used for laundry rooms and closets, where effective is required. Smaller louvered bifold doors are also commonly used to form window shutters in most homes and businesses.
Other popular ones are mirrored. These are most common in bedrooms and bathrooms of the home. Mirrored bifolds may act as full-bodied mirrors, and that is one of the traits that makes them common in the wardrobe. Another popular one is the raised-panel bifold. These doors are the work of fine craftsmanship and have a very elegant look. The raised panel is achieved on these doors by sawing or etching designs into the wood of the doors that give them a "raised" look. These are commonly installed in bedrooms, kitchens and pantires.