Kemble schuco bi fold doors

Bifold Doors Company in Kemble

When buying bifolding doors in Kemble you might be faced with various different options to choose from. If you not sure about the components and properties of doors then finding the right type of door supplier in Kemble could prove to be a challenging task. Few of the important features of the doors are mentioned below.

schuco bi fold doors

Bifolding Door Frames

When selecting a frame always take into consideration three important aspects, for instance, appearance, location and budget. The cheapest frames are the uPVC door frames while the moat costly frames are those made of woods. While considering appearance you need to remember few things, for example, uPVC door frames are not available in a wide range of finishes while aluminium and wooden bifolding door frames, on the other hand, are obtainable in an extensive range of colours. Moreover, if you prefer contemporary look then aluminium and uPVC are the best choice for you while wooden doors tend to have a more natural and traditional look.

Finally, when thinking of location you require determining where you will be fixing the door frame. For instance, wooden frames are ideal for doors which are sheltered from extreme weather conditions as wood is not a highly durable material.

Bifolding Door Glass in Kemble

Doors are made of different types of glasses, such as, double glazing, which tend to be the regular glass for these types of doors, tempered glass doors are known for their strong and additional safety properties, low-e glass comes with a heat reflective coating and lastly the laminated glass, which is made up of double sheets with a plastic layer in between and tend to be highly secured and safe.

Benefits of New Bi-Fold Doors in Your Home

There are many benefits of using bi-folding doors when finishing, renovating or remodeling an interior space. They can come in any design to fit a particular design style. A bi-fold door is a set of panels that has two or more hinged sections, usually folding in pairs. The doors can be opened from either side for one pair, or fold both sides for several pairs.

Larger bi-fold door systems are used as room dividers, barn doors, and even airplane hangar doors. They are usually hung from overhead tracks and suspended by rollers or casters. The innermost door panel has a knob or a door-pull which allows the user to fold the door panels together.

Bi-fold doors eliminate the problem of supporting a large overhead door in a commercial garage or airplane hangar with a low threshold options that offer unrestricted floor space. These doors can be hung in a series, making them ideal as room dividers. The same tracking used for sliding door systems can also be incorporated into bi-fold doors. The design of a bi-fold door allows the panels to fold on themselves without changing the orientation of the suspended casters or rollers. Because the tracks and casters receive some unusual stresses from the opening and closing action, bigger and heavier bi-fold doors are usually equipped with pivot floor tracks to prevent the panels from swinging and to add structural stability.

There are many different types of bi-folding doors currently on the market. Wood used to be the most widely used material, but now doors are also made of metal or glass. Some of them are available with a raised panel, flat panel, v-groove panel or as glass French doors.

Arguably, quite a few years ago, the most popular was the louvered door. A louvered door has stationary or movable wooden slats, or louvers, which permit open ventilation while allowing privacy and preventing passage of light to the interior. They can create dramatic sliding sashes to open up a room or building without reducing thermal or weather resistance.

Louvered bi-fold doors are usually used for closets and laundry rooms where ventilation is required. Smaller louvered bi-fold doors are also commonly used to form window shutters in many businesses and homes. Although bi-fold doors are not intended to secure things as a sturdy front door does, bi-folds can be used all around a home as interior shutters in place of curtains. This is not only an ideal solution for people with dust allergies but they can also provide maximum privacy when closed and floods space with light when open.

Other popular bi-fold doors are the mirror-paneled bi-folds. These are usually found in bedrooms and bathrooms of the home. Mirrored bi-folds may act as full-body mirrors and that is one of the traits that make them a favorite in the wardrobe area. Also specially effective in small spaces, mirrored bi-fold doors provide the illusion of having a bigger space when closed, yet allow maximum use of space in homes, restaurants, hotels, bars, or other interior spaces when opened.

With the advancement of technology doors are produced to be more energy efficient and attractive. Thermally broken aluminium Bi-folding doors are now designed to allow for maximal airflow through an opening. This Bi-folding mechanism is constructed using a chassis in which the movable parts strategically positioned so that the elements can be folded both left and right.

It is no wonder that new designs like the Visofold Panorama, which offers a slim line design; weather proof and virtually maintenance free, are used in homes, hotels, restaurants and stores for its space saving features.

Generally, having bi-fold doors installed is relatively inexpensive. However, the cost of having bi-fold doors can vary depending on the size, materials, and labour. Aside from all the benefits of using bi-folding doors, some can actually be installed by the homeowner themselves.

bifold doors shop

Bifold doors now form part of almost all new build home extensions due to their ability to open up large unobstructed openings allowing the new living space to seamlessly merge with the garden.

The enormous growth in demand for these folding sliding doors in the UK in recent years has led to a substantial increase in the number and type of different door systems now available to the consumer. They are now widely available in a choice of materials and finishes with the three most popular being thermally broken aluminium, upvc and hardwood.

Choosing the right bifold door for your project is an important decision and one that should not be taken purely based on cost alone. Your budget will naturally have an influence on your buying decision but there are other important factors that need serious consideration to ensure you are not disappointed with your purchase. Here are the top five points that are regarded by many as the most essential research when considering a bifold door purchase:

1. THERMAL PERFORMANCE

Since most bifold door installations will be subject to compliance with building regulations it is important to check that the folding door you are about to buy will meet your local authority's interpretation of current building regulations in terms of overall U-value performance. This calculation is based on the specification of the double glazing together with the profile design and dimensions to determine the insulation benefits of the door measured in U-values with the lower the value the better the insulation achieved. The minimum acceptable under current building regulations for replacement doors is a 1.8 U-value but some local authorities will insist on lower values particularly for new build extensions.

2. GLASS SIGHT LINES

Another important consideration should be the sight line or width of door profiles between each panel of the folding sliding door as this will affect the visible glass area available when the door is in the closed position. Most bifold doors are designed with dedicated profiles to minimise these sightlines as much as possible but some timber and many upvc folding doors use wide, chunky profiles that produce very broad sight lines in excess of 200mm wide that will ultimately spoil your view.

3. SECURITY

Most folding doors will feature a high security locking system but many still use face fixed or flag hinges that can pose a possible security issue and allow the hinges to be removed from the outside when the door is closed. Some upvc bifold doors may also use an exposed gearing system that is accessible from the outside of the door when the door is closed which can also pose a possible security threat. You can eliminate these potential security problems by ensuring you choose a folding door that has fully concealed gearing and hinge fixings.

4. THRESHOLDS

Although a flush threshold is the most popular option especially for internal bifold doors this may not always be practical in some cases and a conventional raised threshold will need to be used. It is important to note that the height of these can vary considerably with some upvc bifold door thresholds exceeding 125mm. Such a high 'step-over' threshold may create an accessibility issue for children and the older generation. The latest bifold door designs offer raised thresholds designed to minimise the trip hazard with some offering thresholds as low as 50mm high.

5. TOP HUNG OR BOTTOM ROLLING

Some bifold doors are hung from the top to allow for a minimal threshold at floor level but with all the weight of the door being supported from the top a substantial upgrade of the lintel is normally required for strength and stability. Bottom rolling folding doors are a cost effective and popular alternative since the weight of the door is carried at ground level rather than suspended from the lintel.

Whether you decide on an aluminium, upvc or hardwood bifold door it is a major purchase for your project and one that should be carefully considered to ensure the very best value for your money. Buying a cheap bifold door may prove a disappointment unless you check carefully that the door you are buying will meet your needs and expectations before you order.

Ultra Slim Bifold Doors

What is the bifolding door?

The bifolding door has become a very popular choice over the past 10 years. The traditional patio door or conservatory door has always been a single pane system, or alternatively a French door. A french door has 2 openers which open to either side in order to create a fully open aperture. The bifolding door takes this one step further by offering a fully retractable system which can be manufactured up to 10 metres wide. This has in turn, has led to the number of companies who sell them rise exponentially. Although this can be seen as a good thing this also has its bad points. With so much competition in the bifolding door market how is someone supposed to know which is the best company? Often this question can be answered by your preference to the specific question. Do you prefer a standard handle or thumb turn, do you want the thinnest frames possible or the longest manufacturers warranty? There are no correct answers to these questions, it is normally best to phone around several companies and get good feel for the service they offer.

Strengths of bifolding patio door systems

Allow fully retractable door panels

Range of RAL colours

Add value to your home

Virtually maintenance free

Give your home more space

It is important to understand the differences between different types of bifold door systems. There are 4 different types of system available on the market. The aluminium based folding sliding door, the UPVC bifold, wood bifold and the all new frameless glass patio door system. The most well known is the UPVC due to its high volume of sales around 10 years ago. Since then however the aluminium bifolding door has improved so much that there is no real choice. The UPVc product is made from such low strength material that there are so many more problems with the systems. They often contract so much during seasonal weather that they do not operate properly, they look cheap, come in a limited amount of colours and have very stringent limits on the heights and widths of the system. The only real strength of this system is the price. But if you are looking to add value to your home this will most likely do the opposite. With regards to the wooden based bifold system they are a similar price to the aluminium bifold but also have major issues with contraction during colder months. For this reason the most popular choice and preference for most architects, building contractors and interior designers is the aluminium bifolding door. If you can afford to pay the extra money then you cannot afford to go for the cheaper alternative of UPVc based concertina patio doors.

schuco bi fold doors bi fold doors

South Gloucestershire